Wireless multiplexer combining up to four E1/T1 and Ethernet interfaces
High data rates up to 48 Mbps Long range up to 80 km (50 miles)
Operation frequencies:
- 5.725–5.850 GHz, compliant with FCC and CAN/CSA regulations
- 5.470–5.725 GHz, compliant with ETSI regulation- 5.25–5.35 GHz, compliant with FCC and CAN/CSA regulations
- 2.4–2.4835 GHz, compliant with FCC and ETSI regulations
- 4.940-4.990 GHz compliant with FCC regulation
AirMux-200 is a carrier-class, high capacity, affordable multiplexer, connecting E1/T1 and Ethernet networks point-to-point over a wireless link. Compliant with FCC, CAN/CSA and ETSI regulations for licence-exempt transmission, the AirMux-200 operates over 5.725–5.850 and 5.25–5.35 (FCC,CAN/CSA) GHz, 5.470–5.725 (ETSI) GHz, 2.4–2.4835 (ETSI and FCC) GHz bands and 4.940-4.990 (FCC) bands. Wireless transmission enables enterprises to save the cost of leased lines while eliminating the service provider’s need for deploying fiber, thereby enabling rapid deployment of E1/T1 and Ethernet links at a fraction of the cost.
AirMux-200 consists of an indoor and outdoor unit connected by a Cat-5e outdoor Ethernet cable, allowing a maximum distance of 100 meters (328 feet) between the two units. The outdoor unit can be ordered with a various integrated antennas or with a connector for an external antennas.
AirMux-200 integrates up to four unframed E1 or T1 ports and an Ethernet port for a total air interface throughput of 48 Mbps. This is equivalent to a net payload throughput of up to 18 Mbps full duplex. The maximum range of the AirMux-200 is 80 km (50 miles). Throughput and distance are a function of the distance and regulation.
An integrated 10/100BaseT Ethernet bridge transparently forwards VLAN frames and learns up to 2,000 MAC addresses. The accurate E1/T1 clock recovery, low round trip delay and high link availability position the AirMux-200 as a carrier-class wireless transmission system.
An AirMux-200 link can be managed by a Windows-based application supplied with the device. RADview SNMP fault management can be ordered in cases where many links are deployed and managed from a central platform. All parameter configurations are link-based, simplifying maintenance and installation.
AirMux-200 is a perfect solution for connecting remote enterprise locations, cellular backhaul, broadband Last Mile services and hotspot backhauling.
Connecting Base Station and Base Station control sites
