CELLROUTE AC
CellRoute AC is a fixed cellular terminal that has been developed to enable major network operators to provide Fixed Wireless Access to emerging markets around the world.
In countries where having a fixed line is either an expensive option or network infrastructure does not exist, the CellRoute can provide fixed line functionality over the GSM network.
CellRoute provides users with high quality voice using EFR (Enhanced Full Rate) codecs.
The CellRoute can be self-installed by the end user, making the provisioning cycle simple and reducing costs for the network operator.
In the UK, The Telecom FM Cellroute AC is ideal for connection to the analogue trunk of a PBX telephone system to provide low cost calls to mobile phones.
Telephony Interface
| Call Control | DTMF |
| Loop Current | 40mA off hook |
| Line impedance | 600-ohm complex |
| Ring Voltage | 70Vrms |
| Ring Load | REN 4 |
| CLIP | Bellcore FSK |
| Line Voltage | 48V on hook |
GSM Interface |
|
 |
|
| Bands | E-GSM 900MHz GSM 1800MHz GSM Phase 2+ |
| Transmit Power | Class 4 (2W) for E-GSM 900MHz Class 1 (1W) for GSM 1800MHz |
| Speech Codecs | Half Rate (ETS 06.20) Full Rate (ETS 06.10) |
| SIM Card | 3V |
| Antenna | Integral Omni directional Antenna with SMA connector for external antenna option |
Physical Interfaces |
|
|
|
| Telephone | Analogue / RJ11 or BT603 option |
| GSM Antenna | Gold plated SMA male |
| SIM Card | 3V Small card retained under rear panel |
| Indication | 2 x LED indication for power / Transmission Status |
Approvals |
|
|
|
| CE Certification to R & TTE directive 1999/5/EC GSM Certifications: |
|
|
|
|
||||||
Features Overview |
|
|
|
|
Physical Specification |
|
|
|
| Height | 150 mm |
| Width | 122 mm |
| Depth | 42 mm |
| Weight | 460gm |
