The Konftel 50 is ideal for an office or a smaller meeting room. Give your calls a loudspeaker sound. Your hands are freed and more people can take part in the telephone conversation.
No extra telephone line is required as the Konftel 50 connects to an existing telephone or computer.
IP telephony via your computer IP telephony with full duplex!
Connect the Konftel 50 to the audio input on your computer with the supplied cables. Loudspeaker and microphone volumes are controlled from your computer.
Calls via the system telephone
The most common method for using the Konftel 50. Connects to the receiver connector of your system telephone. Choose whether you want to take calls via the receiver or the Konftel 50 with the push of a button. Instead of the receiver, you can connect a headset if you prefer.
Calls via your mobile phone
Have you tried to host telephone meetings via a mobile telephone? It's okay if you are alone, but is more problematic if two or more people are to both talk and listen using the same telephone. Connect your wireless DECT telephone or mobile phone to the Konftel 50 with an accessory cable. Call as usual and use the telephone's functions.
Konftel 50 Key Features
- Crystal clear sound - OmniSound TM
- Natural sound in both directions (full duplex)
- Simple to connect and use
- No extra phone line is required
- Keypad for volume and mute
- For connection to system telephones, cables are included
- For connection to mobile phones (GSM and DECT)
- For connection to a computer for IP telephony, cables are included
- Can be used in combination with a headset
- 2 years warranty
Konftel 50 Connection
The Konftel 50 sits in between your phone handset and the phone base in the same way you might connect a headset and amplifier base. The incoming phone line still goes into your phone.
First, unplug the handset from the phone's base. Plug it into the port on the switchbox with the handset icon on top.
The other side of the switchbox has two ports. Take the short wire (Which is in the right-hand port if the handset connector is facing you) and plug it into your phone's base (The same jack you just unplugged the handset from).
Finally, plug the 10 foot included phone cable into the remaining jack (This is the red cord in the diagram). The other end of this cord goes into the only jack on the Konftel 50 unit, which is on the bottom. Next to that jack is a small circular hole, which is where the power cord plugs in. Once that is hooked up, the machine is ready to go.
