CS2389 4G Signal Tester Replaces the D2377 4G Signal Analyser

Today sees the launch of the new CS2389 4G Signal Tester that replaces the D2377 4G Signal Analyser.

CS2389 Signal Tester

The new CSL Dual CS2389 updtaes the design and function of this popular 4G Signal tester with a new touch screen interface. It is intended to be used to identify the optimum location for your cellular connected device prior to installation by searching all local base stations. It feeds back the network availability, radio technology (2G/3G/4G), Bit Error Rate (BER) and signal strength.

Key Features and Benefits for installers:

- New colour touch screen with a handy dashboard menu
- Quick Survey Button to run a survey in just one click
- Fully visual monitor mode
- Up to 20-hour battery life
- Memory space holds survey results for up to 250 tests
- Available in 10 different languages
- USB firmware upgrades
- CS2389 4G variant can be used for 2G/3G/4G surveys

VHG760 Compact M2M LTE 4G Router / Vehicle 4G Router.

Westlake have teamed up with Amit to introduce their great range of M2M/IoT mobile broadband connectivity devices to the UK,  Starting with the VHG760 which is a compact, industrial grade M2M 4G router with embedded 4G modem and SIM card slot providing reliable, high speed 4G mobile broadband connectivity with 2 x Ethernet ports and WiFi with Open VPN and IPsec VPN as well as all the usual M2M features such as ping reboot and secure firewall. vhg760-with-antennas-labeled-medium-size   What really makes the VHG760 stand out is the fact that is also comes with built-in GPS and is Emark certified which turns this M2M router into a very capable vehicle 4G router to offer vehicle WiFi hotspot or vehicle 4G CCTV connectivity or other vehicle 4G application.  The VHG760 is housed in a rugged, vibration proof housing and supplied with mounting brackets and supports 9-36VDC power input. - Multi-Purpose M2M and In-vehicle cellular gateway for M2M Remote Access and Monitoring and Moving Vehicle and Mobile Office applications.
- Equipped with one LTE module for high speed cellular network access.
- WiFi Compliance N300; Multiple (8) SSIDs for privilege group users.
- 2*FE LAN ports with tag based and port based VLANs easily to group control and relocate traffic pattern.
- With GPS and provide ability for vehicle tracking or fleet management.
- Fully protocol with NAT/Routing/IPv6 compatible with most IP network.
- IPSec, PPTP, and L2TP VPN support up to 16 concurrent tunnels with max 70Mbps throughput (IPSec).
- Firewall with SPI and IPS prevent hacker attacking and enhance network efficiency.
- SNMP, Telnet CLI, and TR-069 for administrator to manage system.
- QoS and Bandwidth management for optimal bandwidth usage.
- ISO7637 compatible 9V~36V power input. Rugged metal case with vibration and shock proof, bracket mounting kit, easy to install in various place.

Teltonika RUT240 M2M 4G Router Announced

Teltonika have announced that they will start manufacturing their new RUT240 4G Router in July 2017.

This new, compact IoT M2M 4G Router provides a low cost 4G connectivity solution for users that require a cheap and simple 4G mobile broadband connection for monitoring of devices such as CCTV.


The Teltonika RUT240 will provide users with 2 x Ethernet Ports and WiFi and is supplied with 3 detachable antennas as shown in the picture above.  Two of these antennas arte the 4G antennas and the third is the WiFi antenna.  Unlike other Teltonika routers, the RUT240 has an external SIM card slot with SIM tray so you can insert the 4G SIM card without removing the router cover plates.


4G (LTE) – CAT 4 up to 70 Mbps 
3G – Up to 42 Mbps 
2G – Up to 236.8 Kbps 
WiFi – Up to 150 Mbps 
Ethernet – 2 ports 


Digital output – 1
DIN – digital input – 1 
1x LAN 10/100Mbps Ethernet port 
1x WAN 10/100Mbps Ethernet ports 
IEEE 802.11b/g/n WiFi standards 
Durable aluminum housing 
Power over Ethernet (not compliant with IEEE 802.3af – 2003) 
Mobile antenna type – 2x SMA for LTE
WiFi antenna type – 1 x RP-SMA
Input voltage range – 9-30 VDC
Operating temperature range – -40°C to 75° C
Storage temperature range – -45ºC to 80º C
Power consumption – < 5W
Mounting options – DIN RailWall
LED indication – 3x connection status, 5x connection strength, 1x Power


Bridge mode 
Static routes 
Wireless Hotspot 
Wireless Client 
Wireless AP 
Ping reboot 
Periodic reboot 
Real-time graphs 
Backup WAN 
Mobile Traffic counter 
Connection status overview bar 
Configuration backup/restore 
GRE Tunnel 
SNMP Trap 
Send/receive SMS 
Status via SMS 
SMS reboot 
Mobile enable/disable via SMS 
Wireless enable/disable via SMS 
OpenVPN enable/disable via SMS 
Web Filter 
Mobile Data Limit 
Configuration Profiles 
Event logging 
Call Utilities 
Disable Roaming 
Access control safety 
IP/MAC filter
DHCP server 
Dynamic DNS 





RUT240 Box Contents

RUT240 Box Contents

  • 1 x RUT240 4G Router
  • 1 x Mains Power Supply
  • 1 x Patch Lead
  • 2 x Cell Antennas
  • 1 x WiFi Antenna


RUT240 Applications

RUT240 Applications


Teltonika RUT230 3G Router Announced

Teltonika have announced the launch of their new RUT230 3G Router.

This new low cost IoT 3G Router will replace the RUT500 3G Router and will be slightly smaller, made possible by the fact that there are now only 2 x Ethernet Ports.  The RUT230 router will still retain the WiFi functionality and Teltonika have made installation of the SIM card easier with the addition of an external SIM card slot so the SIM card can be inserted without removing the router cover plate.  They also include a Digital IO interface.





  • 3G – Up to 14.4 Mbps i
  • 2G – Up to 236.8 Kbps i
  • WiFi – Up to 150 Mbps i
  • Ethernet – 2 ports i
  • SMS i

  • Digital output – 1
  • DIN – digital input – 1 i
  • 1x LAN 10/100Mbps Ethernet porti
  • 1x WAN 10/100Mbps Ethernet ports i
  • IEEE 802.11b/g/n WiFi standards i
  • Durable aluminum housing i
  • Power over Ethernet (not compliant with IEEE 802.3af – 2003)i
  • Mobile antenna type – 1 x SMA for 3G
  • WiFi antenna type – 1 x RP-SMA
  • Input voltage range – 9 – 30 VDC
  • Operating temperature range – -40 °C to 75 °C
  • Storage temperature range – -45 °C to 80 °C
  • Power consumption – < 5W
  • Mounting options – DIN Rail, Wall
  • LED indication – 2x connection status, 5x connection strength, 1x Power

  • Bridge mode i
  • Static routes i
  • NTP i
  • Wireless Hotspot i
  • Wireless Client i
  • Wireless AP i
  • Ping reboot i
  • Periodic reboot i
  • Real-time graphs i
  • Backup WAN i
  • Mobile Traffic counter i
  • Connection status overview bar i
  • Configuration backup/restore i
  • IPsec i
  • GRE Tunnel i
  • OpenVPN i
  • PPTP i
  • L2TP i
  • SNMP i
  • SNMP Trap i
  • Send/receive SMS i
  • Status via SMS i
  • SMS reboot i
  • Mobile enable/disable via SMS i
  • Wireless enable/disable via SMS i
  • OpenVPN enable/disable via SMSi
  • Web Filter i
  • Mobile Data Limit i
  • Configuration Profiles i
  • Event logging i
  • Call Utilities i
  • Disable Roaming i
  • Access control safety i
  • VLAN i
  • CLI i
  • Firewall i
  • IP/MAC filter i
  • DHCP server i
  • Dynamic DNS i
  • RMS support i


RUT230 Antenna Options

You can see from the image below that the RUT230 router has 2 x Antenna connections – a single connection for Cell Antenna (SMA Female) and a single WiFi Antenna connector (RP SMA) this means that the RUT230 router will support a variety of different 3G Antennas depending upon your installation requirement.

RUT230 antenna connectors


The RUT230 is supplied with 2 x elbow joint antennas as standard (pictured below)

RUT230 Antennas



Three Mobile (3mobile) network outages in March 2017

It appears that Three Mobile are rolling out network improvements across the UK in March and April so if your 3G/4G router is unavailable for a period of time and you are using a 3mobile SIM card then it might be worthwhile checking whether the planned maintenance is the reason for 3G/4G network down time and the easy way to do that is visit the Three mobile website and enter the location of where you are using the 4G router with the 3mobile SIM card.

Here is the link



Speedroute LTE Advanced CAT6 4G Router Available In April 2017

If you need a reliable, robust, multi-functional, high speed 4G router for your M2M remote monitoring and management application then the new Proroute Speedroute H820Q LTE Advanced CAT6 4G Router could be just what you need.

CAT6 4G Router

LTE Advanced 4G Connectivity

Using the Sierra Wireless AirPrime MC7430 to provide high speed 4G connectivity the Speedroute H820Q can deliver some of the fastest download and upload 4g speeds (obviously dependent upon your mobile provider) and the CAT6 Modem provides LTE-FDD, LTE-TDD, DC-HSPA+, HSPA+, HSDPA, HSUPA, WCDMA, TD-SCDMA and GNSS connectivity for networking, and M2M applications over several radio frequency bands and supports 3G roaming.

MC7430 CAT6 4G modem

Sierra Wireless® AirPrime® MC Series supports the latest 4G and 3G networks in North America, Europe, and Asia. Optimized for low power consumption, the MC Series is ideal for today’s mobile computing, networking, and industrial IoT applications.

The MC Series supports 3G and 4G global networks, including LTE Advanced, with automatic fallback to 3G or 2G networks

Hi Speed WiFi Wireless Hotspot

The Speedroute® H820Q is supplied with dual-band, dual concurrent WiFi (802.11 a/b/g/n/ac, 2.4Ghz + 5Ghz) to provide high speed wireless networking for connected devices to share the high speed 4G connection.  The H820Q can also be configured for WiFi WAN to be included in the WAN failover options eg. you can use wireless WAN as primary Internet service and fail over to embedded 4G, or vise versa.  Of course the Speedroute 802.11AC WiFi has all the normal security features and also a Hotspot / Captive portal Option.


The other useful feature worth mentioning is the fact the the Speedroute H820Q is supplied with 5-60VDC power input as standard so it makes it suitable for installation into vehicles to provide Vehicle 4G WiFi for vehicle CCTV and other in-vehicle solutions and the 802.11AC WiFi means it can also be used to provide passenger WiFi if needed.


CLICK HERE to view the full product details and specification for the SPEEDROUTE CAT6 4G Router



Teltonika RUT950 – New Power Connector and Telit 4G Module

Teltonika have announced today that the Teltonika RUT950 will be produced with a new terminal power connection.

RUT950 Power connector


Teltonika claim the benefits of the new style power connector for the RUT950 4G Router will be

1) Socket plug with fixation
2) Ready for RCM certification
3) One socket for industrial and home usage
4) Reserved pins for ignition (future option)

Teltonika also announced that they will be replacing the existing Huawei 4G Modem and replace it with a new CAT4 Telit 4G Modem.

The new Telit Module has the following features

  • LTE (DL/UK) – 150 / 50 Mbps
  • LTE Bands – B1 / B3 / B7 / B8 / B20
  • HSPA (HSDPA) – 21 Mbps
  • HSPA (HSUPA) 5.76 Mbps
  • UMTS – 384 Mbps
  • GSM / GPRS / EDGE – Dual band Europe (900 / 1800 Mhz)
  • UMTS / HSDPA / HSUPA – B1 / B8 (2100 / 900 Mhz)
  • EDGE – 236.8 Kbps
  • GPRS – 85.6 Kbps

Compared to the old Huawei Module

  • LTE (DL/UK) – 100 / 50 Mbps
  • LTE Bands – B1 / B2 / B3 / B5 / B7 / B8 / B20
  • HSPA (HSDPA) – 21 Mbps
  • HSPA (HSUPA) 5.76 Mbps
  • UMTS – 384 Mbps
  • GSM / GPRS / EDGE – Quad Band)
  • UMTS / HSDPA / HSUPA – B1 / B2 / B5 / B8
  • EDGE – 236.8 Kbps
  • GPRS – 85.6 Kbps

So for 4G connectivity the main benefit is the move to a CAT4 module to hopefully provide better download speeds – of course your maximum download and upload speeds for the RUT950 4G Router will depend upon distance to 4G base Station and the number of simultaneous users and the mobile networks bandwidth and service restrictions.

Once Teltonika start production of the revised RUT950 4G Router then the old barrel style connector will no longer be available.  replacement power supplies will need to be specially ordered and are expected to be more expensive than the normal mains power supplies.

New Low Price of £70.00 For The Teltonika RUT500 3G Router

The Teltonika RUT500 is probably the cheapest M2M 3G Router in the UK – priced at just £70.00 each + VAT the RUT500 Industrial Grade embedded 3G Router provides a low cost, reliable solution for remote monitoring and management applications that require a 3G mobile broadband Internet connection.

The RUT500 3G Router provides the user with 3 x Ethernet LAN Ports, 802.11n WiFi and an RJ45 Ethernet WAN Port.

Teltonika RUT500

To get connected to the 3G Internet service simply remove the front panel of the router (where the antennas are connected) and insert your 3G SIM Card – this can be a normal 3G mobile broadband SIM card or a Fixed IP SIM Card.  If you are using the Teltonika RUT500 for remote monitoring or management then you would be better off using a Fixed IP SIM card service because many normal 3G SIM cards ordered directly from the mobile networks use CGNAT (Carrier Grade NAT) which means that your router 3G connection will only get a private IP address from the mobile network which means that you won’t be able to connect to the router over the Internet which means that you can’t use DYNDNS and because you can’t remotely connect to the RUT500 then port forwarding will not work to connect to your devices on the LAN.

In fact, the only network that provides a public IP address using a standard network SIM card is 3mobile and you need to use the APN of 3internet in order to get the router to request a public IP address when it connects.  this is not a guaranteed service so sometimes you will not get a public IP address so you will be unable to connect to your router and it is not a contractual part of your service and may be stopped at any time in which case you will still be liable for the rentals for the remainder of the contract and will then be left with no choice but to switch to a Fixed IP SIM card service so you would then need to visit each site and switch out the SIM cards.

For this reason many M2M users will opt for the convenience of a Fixed IP SIM card service.

The Teltonika RUT500 3G router also includes features like ping reboot so it can actively monitor the 3G connection and when the mobile network disconnects the router it will be recognised and will be able to reboot and reconnect to the 3G service eliminating the need for time consuming and expensive site visits to power cycle your 3G router.

The Teltonika RUT500 is supplied with a UK Mains Power Supply, a DIN Rail Mounting Kit, A CAT5e patch lead, 1 x elbow joint Cellular antenna, 1 x elbow joint WiFi antenna and a quick set up guide.


RUT500 Key Features

- HSPA+ 3.9G 21Mbps DL and 5.75Mbps UL
- Quadband UMTS and GSM
- Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b wireless standards
- Complies with IEEE 802.3 and IEEE 802.3u standards
- 3 x LAN Ethernet ports, 1 x WAN Ethernet Port for failover working mode.
- Durable aluminum housing
- External antennas
- Integrated IPSEC, OpenVPN and Dynamic DNS
- 3G backup WAN function
- SMS reboot function

RUT500 Specification

LAN and Wi-Fi
- Wireless AP, Router, 4-Port Switch and Firewall in one device
- High performance 320 MHz CPU with 256 Mbits SDRAM
- IEEE 802.11b/g/n, IEEE 802.3, IEEE 802.3u standards
- 64/128-bit WEP, WPA, WPA2, WPA&WPA2 encryption methods
- 3xLAN 10/100Mbps Ethernet ports
- 1xWAN 10/100Mbps Ethernet port
- Supports Auto MDI/MDIX
- Remote/local Web management
- 1x 5dBi wireless antenna
- SSID stealth mode and access control based over MAC address
- System log to record the status of the Router
- Auto negotiation/manual mode for IEEE 802.11b/g/n
- Dynamic DNS
- LAN access control over Internet connection
- Virtual server
- Auto wireless channel selection
- OpenVPN
- Dynamic DNS
- Backup WAN
- SMS and Ping reboot
- 1x Power LED, 4x LAN status LEDs

- 850/900/1900/2100 MHz
- Power Class 3 (0.25 W, 24 dBm) for UMTS
- UMTS mode: 384 Kbps DL/384 Kbps UL
- HSDPA mode: 14.4 Mbps (Cat 10) downlink speed
- HSUPA mode: 5.76 Mbps (Cat 6) uplink speed
- 3dBi antenna

- 850/900/1800/1900 MHz
- Power Class 4 (2 W, 33 dBm) for GSM/GPRS 850/900 MHz bands
- Power Class 1 (1 W, 30 dBm) for GSM/GPRS 1800/1900 Mhz bands
- Power Class E2 (0.5 W, 27 dBm) for EDGE 850/900 MHz bands
- Power Class E2 (0.4 W, 26 dBm) for EDGE 1800/1900 MHz bands
- GSM: 14.4 Kbps DL/14.4 Kbps UL
- GPRS: 85.6 Kbps DL/42.8 Kbps UL (class 10)
- EDGE: 236.8 Kbps DL/118.4 Kbps UL (class 10)

Electrical, Mechanical & Environmental
- Dimensions (H x W x D) 100mm x 85mm x 36mm
- Weight 210g
- Power supply 100V – 240 VAC -> 9 VDC wall adapter
- Power consumption < 7W
- Antenna connectors 2 x SMA for GSM, 1 x RP-SMA for Wi-Fi
- Indicators 4 x Ethernet LEDs, 1 x Power LED, 1 x GSM LED
- Operating temperature 0o to 50o C
- Storage temperature -20o to 70o C
- Operating humidity 10% to 90% Non-condensing

Teltonika RUT500 Applications

- Construction
- Energy Monitoring
- Remote Media / Digital Signage
- Remote Access Control
- Building Automation and monitoring

In The Box

1 x Teltonika RUT500 21Mbps 3G Router
1 x UK PSU – 240VAC – 9VDC Mains Power Adapter (router supports 7-30VDC)
1 x 3G Stick Antenna (Elbow Joint) for GSM MAIN
1 x WiFi Stick Antenna (Elbow Joint)
1 x CAT5e Patch Lead
1 x DIN Rail Mounting Kit (router is pre-drilled)
1 x Quick Start Guide


Teltonika RUT500 SMS Reboot / SMS Status Feature

TELTONIKA RUT500 Port Forwarding using DYNDNS (using Three Mobile SIM Card)

The following video demonstrates how to configure the RUT500 with a 3 Mobile SIM (using the APN 3internet) to get a public IP address allocated to the router so that the router can be accessed over the internet and then configuring port forwarding to connect to an IP camera on the LAN. It demonstrates that using a different APN the router will connect to the internet but will be given a PRIVATE IP address which means that you will be unable to connect to the router over the Internet and in this case will not be able to use port forwarding.

The video also explains the imporance of ensuring that the device on the LAN is correctly configured to ensure that it has the correct IP address AND default gateway and demonstrates what happens if the default gateway is incorrect or missing which is one of the most common reasons that port forwarding does not work.


ZTE MF283 4G Router

New in stock is the ZTE MF283 LTE 4G Router designed to provide high speed 4G connectivity for your business.

just insert your 4G data SIm card and connect to the mains and enjoy superfast 4G internet which you can share on your office network with RJ45 Ethernet connectivity or connect your wireless devices with the MF283 built-in WiFi.




The ZTE MF283 Office 4G Router is simple to use – simply insert your 4G Data SIM and turn on the power. You now have an office 4G router with 4 x RJ45 Ethernet Ports and WiFi with high speed 4G mobile broadband connectivity so your wired and wireless users can all communicate with each other and access the Internet via high speed 4G services.

The ZTE MF283 has just been released and is the first wireless broadband router in the world that supports LTE FDD 800/900/1800/2100/2600MHz AND LTE TDD 2300Mhz AND WCDMA 850/900/1900/2100Mhz which means it works on all 4G and 3G networks with download speeds of up to 100Mbps and access for up to 32 WIFI devices, making it an ideal 3G/4G Router for Small Office use.

It takes a single SIM normal size card in its slot.

And it has 2 telephone ports for making and receiving calls from a standard handset over mobile. It supports CSFB (Circuit-switched Fallback) so that when calls are made in LTE mode, the device will fall back to 3G mode to allow the call to be handled circuit-switched. (Network mode cannot be set to 4G only for CSFB to work).

4G BAND: LTE FDD 2600/2100/1800/900/800 MHz & LTE TDD 2300 MHz
3G BAND: DC-HSPA+/HSPA+/HSUPA/HSDPA/UMTS 2100/1900/900/850 MHz
2G BAND: GSM/GPRS/EDGE 1900/1800/900/850 MHz

LTE DL Speed up to 100 Mbit
LTE UL Speed up to 50 Mbit/s

HSPA+DL (DOWNLOAD) up to 42.2Mbps
HSPA+UL up (UPLOAD) to 5.76Mbps


 - Support up to 32 devices via WIFI & 4 via LAN cable (RJ45)
 - Wi-fi: 802.11 b/g/n; 2 X 2 MIMO, 2.4&5.8G
 - Support PSTN & VOIP voice; WebUI & ZTE Wi-Fi Monitor
 - PORT: 4 X LAN (RJ45)+ 1 X USB + 2 X Tel (RJ11)+ 1 X Sim SLot (Normal Sim)
 - One touch connection,LED indication display,hassle free,plug and play??
 - Data,voice and sms service supported
 - High speed connectivity for 32 multiple users
 - Support USB storage, DLNA, IPv6, TR069 upgrade; Fota upgrade (customized) WPS
 - Internal Antenna(external antenna compatible, SMA interface)
 - SMS Send and Receive with Phonebook
 - Size: 195mm*150mm*55mm
 - Choice of wire or wireless connection
 - Secure protected connection
 - Securely send files through Smart Hub

MF283 Box Contents:-

1 x ZTE MF283 modem
1 x ZTE power adapter
1 x RJ45 network cable

Buy the ZTE MF283 4G Router online at www.3grouterstore.co.uk