Teltonika RUT230 3G Router Announced

Teltonika have announced the launch of their new RUT230 3G Router.

This new low cost IoT 3G Router will replace the RUT500 3G Router and will be slightly smaller, made possible by the fact that there are now only 2 x Ethernet Ports.  The RUT230 router will still retain the WiFi functionality and Teltonika have made installation of the SIM card easier with the addition of an external SIM card slot so the SIM card can be inserted without removing the router cover plate.  They also include a Digital IO interface.

RUT230-3G-router

 

 

  • TECHNOLOGY

  • 3G – Up to 14.4 Mbps i
  • 2G – Up to 236.8 Kbps i
  • WiFi – Up to 150 Mbps i
  • Ethernet – 2 ports i
  • SMS i
  • HARDWARE

  • Digital output – 1
  • DIN – digital input – 1 i
  • 1x LAN 10/100Mbps Ethernet porti
  • 1x WAN 10/100Mbps Ethernet ports i
  • IEEE 802.11b/g/n WiFi standards i
  • Durable aluminum housing i
  • Power over Ethernet (not compliant with IEEE 802.3af – 2003)i
  • Mobile antenna type – 1 x SMA for 3G
  • WiFi antenna type – 1 x RP-SMA
  • Input voltage range – 9 – 30 VDC
  • Operating temperature range – -40 °C to 75 °C
  • Storage temperature range – -45 °C to 80 °C
  • Power consumption – < 5W
  • Mounting options – DIN Rail, Wall
  • LED indication – 2x connection status, 5x connection strength, 1x Power
  • FIRMWARE

  • Bridge mode i
  • Static routes i
  • NTP i
  • Wireless Hotspot i
  • Wireless Client i
  • Wireless AP i
  • Ping reboot i
  • Periodic reboot i
  • Real-time graphs i
  • Backup WAN i
  • Mobile Traffic counter i
  • Connection status overview bar i
  • Configuration backup/restore i
  • IPsec i
  • GRE Tunnel i
  • OpenVPN i
  • PPTP i
  • L2TP i
  • SNMP i
  • SNMP Trap i
  • Send/receive SMS i
  • Status via SMS i
  • SMS reboot i
  • Mobile enable/disable via SMS i
  • Wireless enable/disable via SMS i
  • OpenVPN enable/disable via SMSi
  • Web Filter i
  • Mobile Data Limit i
  • Configuration Profiles i
  • Event logging i
  • Call Utilities i
  • Disable Roaming i
  • Access control safety i
  • VLAN i
  • CLI i
  • Firewall i
  • IP/MAC filter i
  • DHCP server i
  • Dynamic DNS i
  • RMS support i

 

RUT230 Antenna Options

You can see from the image below that the RUT230 router has 2 x Antenna connections – a single connection for Cell Antenna (SMA Female) and a single WiFi Antenna connector (RP SMA) this means that the RUT230 router will support a variety of different 3G Antennas depending upon your installation requirement.

RUT230 antenna connectors

 

The RUT230 is supplied with 2 x elbow joint antennas as standard (pictured below)

RUT230 Antennas